Power Factor Correction ICs
-
Status:Available
The FA1B00N is a control IC for configuring a critical-mode power factor correction converter. It achieves low power consumption by using a high-voltage CMOS process. It also has an FB short-circuit detection circuit that stops operation when an abnormality is detected by the output voltage detection unit.
Features
- Capable of low standby power by disabling input voltage detection
- High-precision current detection: 0.65 V ± 2%
- Improves efficiency under light loads using a maximum frequency limiting function
- Suppresses noise using an overshoot reduction function
- Achieves low power consumption by using a high-voltage CMOS
- Startup current of 300 μA (max), current of 1.2 mA (typ) during operation
- Capable of directly driving power MOSFET, output peak current: source 0.5 A/sink 1 A
- Stops circuit operation when an abnormality is detected by the output voltage detection unit using an FB short-circuit detection circuit
- Built-in low voltage malfunction prevention circuit (13 V ON/9 V OFF)
- Incorporates ON/OFF function in the FB pin using an external signal
- LED lamp support
- Package: SOP-8
Applications
- Switching Power Supplies
- LED Lighting
Specifications
| Controller type | CRM PFC |
|---|---|
| Applied circuit Detail | PFC (Boost/Flyback) |
| Frequency | Selfoscillation |
| VCC(V) | 10 to 24 |
| OVP pin Detail | - |
| Overload operation | No (with overcurrent protection) |
| Overvoltage operation | Auto-Recovery (FB) |
| Package | SOP-8 |
Documentation Tools
| Reference design | Power Supply Control IC Reference Design |
|---|---|
| Selection Guide | Power Supply Control IC Selection Guide |
